Products
160-600kW MegaCharge SeriesHigh-PowerDC Fast Charger
Five power ratings· dual-gun charging· Dynamic Power Allocation Optional liquid-cooled supercharging· GB/T/ CCs2/ NAcS /MCs
Parameter
Five Power Ratings Comparison
| Parameter | 160kW | 240kW | 360kW | 480kW | 600kW |
| Power module config. | 4×40kW | 6×40kW | 6×60kW | 8×60kW | 10×60kW |
| Output voltage range | 200–1000 V DC | 200–1000 V DC | 200–1000 V DC | 200–1000 V DC | 200–1250 V DC |
| Max current / gun (air) | 250A | 250A | 250A | 250A | 250A |
| Max current / gun (liquid) | 400A | 500A | 600A | 600A | 600A / 1500A (MCS) |
| Number of guns | 2 guns (up to 4 configurable) | 2 guns (up to 4 configurable) | 2 guns (up to 4 configurable) | 2 guns (up to 4 configurable) | 2 guns (up to 4 configurable) |
| Connector standards | GB/T · CCS2 · NACS | GB/T · CCS2 · NACS | GB/T · CCS2 · NACS | GB/T · CCS2 · NACS | GB/T · CCS2 · NACS · MCS |
| Liquid-cooled cable | Optional | Optional | Optional | Optional | Standard / Optional |
| Rated input current (AC380V) | ~258A | ~388A | ~582A | ~775A | ~969A |
| Dimensions W×D×H | 750×650×1800 mm | 750×650×1800 mm | 800×700×1900 mm | 800×700×1900 mm | 800×700×1900 mm |
| Unit weight | ~280kg | ~390kg | ~520kg | ~660kg | ~800kg |
| Typical applications | Urban, destination | Urban, retail | Highway, logistics | Highway, commercial | MCS trucks, MW stations |
General Technical Specifications
| AC Input | ||
| Rated input voltage | 3-phase AC 380V (323–437V adaptive) | |
| Input frequency | 45Hz – 65Hz | |
| Input system | 3-phase 5-wire 3P+N+PE | |
| Power factor | ≥ 0.99 (full load) | |
| Total harmonic distortion | ≤ 5% (THDI) | |
| Overall efficiency | ≥ 95% (full load) | |
| DC Output | Output voltage range | 200–1000V DC (MCS up to 1250V) |
| Rated output power | 160 / 240 / 360 / 480 / 600 kW | |
| Max current per gun | Air 250A / Liq. 500–600A / MCS 1500A | |
| Power allocation | Dynamic multi-gun, on-demand | |
| Voltage regulation | ±0.5% | |
| Current regulation | ±1% | |
| Connector Configuration | Charging connectors | GB/T 20234.3 / CCS2 / NACS / MCS |
| Number of connectors | Up to 4, flexible combinations | |
| Cable length | 5m standard, 3m / 7m optional | |
| Cooling method | Air-cooled (std.) / liquid (opt.) |
| Protection & Environment | Ingress protection | IP55 (whole unit) |
| Operating temperature | -40°C – +55°C | |
| Storage temperature | -40°C – +70°C | |
| Relative humidity | 5% – 95% (non-condensing) | |
| Altitude | ≤ 2000m (derate above) | |
| Noise | ≤ 65dB (liquid-cooled ≤ 55dB) | |
| Mechanical | Dimensions W×D×H | 750×650×1800 mm (standard) |
| Unit weight | ~350–800kg by power rating | |
| Enclosure material | Cold-rolled steel, powder-coated | |
| Mounting | Floor-standing, anchor bolts | |
| Communication & Display | Communication protocol | OCPP 1.6 JSON / OCPP 2.0.1 |
| Network connectivity | 4G/5G (std.) + Ethernet + WiFi | |
| Operation display | 7-inch touchscreen | |
| Advertising screen | 32-inch FHD bright (43/55 opt.) | |
| Indicator lights | RGB status (R/G/Y/B) |
Note: Values above are for standard models; power modues suppor optonal N1 redundancy. Dmensions and weighits vay b power rating. Finalconfiguration is subject to
the official technical datasheet and contract.
Picture Display
Smart Charging On-the-go, Full Power Anytime
Features
Integrated High-Power DC ChargingBuilt for Global Supercharging Networks
The MegaCharge Series is FREIDA Intelligent Technology (Hubei) Co.,Ltd.'s new-generation high-power DC fast charger for the global commercial and public charging market, covering 160kW to 600kW in five standard configurations. Power modules, control system, HMI and charging cables are integrated into a single floor-standing cabinet with simultaneous dual-gun charging, serving everything from urban fast charging and highway supercharging to passenger-car top-up and megawatt charging for heavy commercial vehicles.
A single platform supports GB/T, CCS2, NACS and MCS connectors, connects to a 380V three-phase grid, serves passenger cars, commercial vehicles and heavy trucks, and supports worldwide export deployment.
Intelligent dual-gun output. Both guns charge simultaneously with dynamically allocated power, and a single gun can deliver the charger's full rated power for ultra-fast top-up. Optional liquid-cooled cables provide 600A and up to MCS 1500A, giving heavy trucks megawatt-class charging capability.
Six Key Application Scenarios
● Highway Supercharging
360-600kW liquid-cooled, ~300kmrange added in 10 min
● Heavy / Mining Trucks MCS
600kW MCS 1500A, megawatt charging
● Urban Public FastCharging
160-360kW for city centers &transport hubs
● Retail & Commercial Complexes
160-240kW with ad-screen revenue
● Logistics/Commercial Fleets
240-480kW multi-gun cluster & smart scheduling
● Destination Charging
Hotels, resorts, parks & office buildings
High-Power Reliability &Global Compatibility Engineering
● Full Power Range Coverage
Multiple power ratings from 160-600kW; high-performance three-phase modules support optional N+1 redundancy and hot-swap maintenance. One charger covers every scenario from fast to ultra-fast charging.
● Multi-Standard Connectors
GB/T, CCS2, NACS and MCS connectors are flexibly configured by market, with up to 4 guns per charger-compatible with mainstream vehicles and charging ecosystems worldwide.
● High-Current Supercharging
Standard air-cooled 250A; optional liquid-cooled cables reach 500-600A and MCS up to 1500A, enabling rapid top-up even for heavy-duty trucks.
● Intelligent Power Scheduling
Dynamic multi-gun power allocation and multi-charger cluster control intelligently dispatch power by real-time vehicle demand,maximizing utilization and site throughput.
● Outdoor HD Ad Screen
Standard 32-inch 2000nits high-brightness screen (43/55-inch optional), supporting remote ad delivery, split-screen display and charging guidance to create added revenue.
● Open Communication Protocols
Supports OCPP 1.6 JSON /2.0.1, with standard 4G/5G and Ethernet for cloud monitoring, OTA upgrades and remote diagnostics-no single-vendor lock-in.
● Comprehensive Protection
IP55-rated for a wide operating range of-40°C to +55°C, with complete over/under-voltage, over-current, short-circuit, leakage,over-temperature and surge protection.
● Plug & Charge
ISO 15118 Plug & Charge completes authentication and billing automatically on plug-in-no QR scan or card needed. QR code,RFID and APP payment are also supported.
Application Cases
Smart Charging On-the-go, Full Power Anytime
Energy Storage Integrated Charging Station
Mining site
High-speed way
Bus Station
Seaport
Oil company
Resort Hotel
Airport
Corporate Advantages
Smart Charging On-the-go, Full Power Anytime
Modular Design
Core components are integrated modularly, making troubleshooting and maintenance more convenient and reducing downtime.
User-Friendly Human-Machine Interaction
High-definition touch screen combined with card-swiping induction area, featuring simple operation and multi-language support.
Ultrafast Energy Replenishment
With a maximum output of 240kW, it can charge mainstream electric vehicles from 30% to 100% in 30 minutes.
Intelligent Network Management
Supports remote monitoring, fault early warning, and data statistics, enabling efficient station management for operators.
Industrial-Grade High Protection
IP55 protection rating, adapting to complex outdoor environments such as high temperature, rain, snow, and sand, ensuring stable operation.
3/4Guns Intelligent Load Balancing
Dynamically distribute power, automatically adjust current when 3/4 guns charge simultaneously, ensuring charging efficiency and device safety.
FAQ
Smart Charging On-the-go, Full Power Anytime
What after-sales support is provided?
2-year warranty for the whole unit, 3-year warranty for core components. 7×24 online customer service, remote fault diagnosis
How to view charging data and settle payments?
The charger screen displays real-time voltage, current, battery level and cost. The supporting APP enables remote monitoring and progress alerts, with automatic settlement after charging via WeChat/Alipay.
Is it safe for outdoor use?
IP54 protection rating + cold-rolled steel body, rainproof, dustproof and impact-resistant. Built-in lightning, over-temperature and leakage protection for stable operation even in extreme weather.
What installation conditions are required?
Only requires 380V three-phase power supply. Pedestal floor installation needs no additional civil engineering and can be commissioned in 4 hours.
Which vehicles is this charger compatible with?
Compatible with over 90% of new energy vehicles with DC charging ports on the market, compliant with GB/T 20234.3-2015 national standard. Works with Tesla, BYD, NIO and other mainstream brands.
After-sales service
Smart Charging On-the-go, Full Power Anytime
Regular equipment inspection
Regular equipment inspections and software upgrades to ensure long-term stable operation.
7×24-hour
7×24-hour remote technical support, responding to fault reports within 2 hours;
Whole machine warranty
12-month warranty for the whole machine, 24-month warranty for core components;
Certificate
ICR/VC/UA260130
DC wall mounted pile remote monitoring and scheduling platform
Intelligent scheduling software for high-power DC landing piles
480KW DC landing pile intelligent management system
DC charging equipment for electric vehicles
TEST REPORT
Related Products
Smart Charging On-the-go, Full Power Anytime
Convenient charging solutions for home and business
FREIDA EV 10+Years manufacturer 60kW-480kW EV Charger
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Freida Intelligent Technology (Hubei) Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地